Reflective Berlin reflective stickers are a fun way to improve visibility in the dark. You can equip your bike frame, helmet, fender, or whatever else you can think of with these little reflective ghosts.

The package contains 1 sheet, 4 stickers.
The thickness of the stickers is around 0.1mm.

The stickers consist of a reflective film from the traffic safety sector, which is used for warning markings, traffic signs and information signs outdoors. The reflective foil meets the requirements of EN12899-1 and is characterized by its durability and absolute resistance to weathering, corrosion and solvents. Temperatures from -50° to +80° Celsius do not affect the material.

The retro reflection is created by tiny glass spheres that are attached to a transparent plastic layer and reflect the light back to the source. The surface is made of alkyd resin, the adhesive is made of solvent polyacrylate. The full reflection properties are guaranteed for at least 7 years.

The printed colors are UV-resistant and scratch-resistant, i.e. no fading due to sunlight or color loss due to weather

Use:

The stickers must be attached to a hard, smooth surface. Textiles or hard foam (Urban Arrow) are not suitable as a base.
The surface to which the stickers are glued must be completely dry, clean and grease-free. Remove the sticker from the sheet and press it to the place you want.
When gluing, the outside temperature should be above 10 degrees Celsius and preferably close to room temperature. The glue has reached maximum adhesion to its substrate 1-2 days after gluing.

Note: The stickers may leave a mark on the surface after longer use.

Care:

If the surface to which the sticker is glued is dirty, you can easily wipe the dirt off the sticker either with water or a detergent suitable for the substrate.

Trademark:

Reflective Berlin